Directv dish installation tips

There are many online directories such as DMOZ. Don't try to tackle this installation on your own. The costs of a professional DIRECTV installer are far less than when you need to replace your system after a poor installation attempt. There may be restrictions for these units and you want to be sure you are allowed before you spend the money on the system.

Similarly, many homeowners association dictate the practices of an apartment complex. If you own your apartment, get clearance from your homeowner's association. If you are having it delivered, it usually takes no more than a few days to get there. Contact an Installer — An apartment building isn't the easiest place to mount a satellite dish. They will get you set up in no time and guarantee the reception stays good or they will come move it for you. Once these are complete, you have no more work to do besides parking it front of the tube and watching all of your favorite programs on DIRECTV.

For the people who love to be out on the water, but do not want to miss their favorite shows or sporting events, there is a solution. You can now install a DirecTV satellite dish on your boat.

Installing DirecTV on your boat is the perfect solution for the weekend boater who is also a weekend warrior. One thing is for sure, on a boat, you avoid many of the problems that can hurt a satellite transmission, namely, other structures.

On the open water you can get a great signal from DirecTV. If you have a boat and are interested in installing DirecTV on it, I wouldn't advise doing it yourself.

Your boat is a pretty large investment, and one that you shouldn't be quick to drill holes into. With a professional installing your DirecTV system, you can be sure that their work will be insured should anything go wrong. With a professional, you can be pretty sure nothing will, but it is always best to have a safeguard. Installing DirecTV will take a professional less than a day on your boat and on your next trip, you can feel the waves without missing the game.

Recreational Vehicles are enjoying a renaissance these days. More and more people are choosing to get in an RV to take a trip, go tailgating, or to see extended family.

The demand to keep a family entertained on these trips is great. Cabin fever can sometimes set in without sufficient stimulation. The dishes will actually lock on to the signal of the DIRECTV satellite and track it as you drive to ensure uninterrupted viewing pleasure. Once you have the equipment, find a good location on the roof of your camper to mount it to.

Once the dish is mounted, you will want to snake your coaxial cable through the roof to an outlet somewhere inside the vehicle. You can even split the cable in order to get signals to independent TVs with independent receivers.

Pointing the dish in the right direction south is a necessity. However, once the signal is acquired, you will want a great connection to your receiver from your dish to ensure good quality.

Here are a few tips on getting the best connection from your dish to your receiver. Single Connections — When possible, try to not split the cable too many times prior to reaching the receiver. When you splice a cable using a splitter, you can diminish the strength of the signal and the quality of the reception. Try to use longer cable to avoid splitting. Quality Cable — Spare little expense when you are connection your dish to your home or receiver.

A Strong Seal — When you connect your dish to your home, make sure that the cable is well connected. There are attachments that can be added to these types of connections that will insure that it will not come loose unless you want it to. Check you local hardware store for these additional pieces. However, if you are going to tackle the project yourself, here are a few reasons you may want to reconsider.

Damage — Often in any installation this complex, the chances of damage to the necessary components is apparent. Many people who attempt DIRECTV installation on their own find that they strip too many nuts or ding up their dish and in the end they cannot get a proper reception.

The number to order their service is Have the receiver installed in a location with an unblocked view of the southern sky. Most satellite receivers are installed on a roof or balcony. If possible, trees and buildings should not block the receiver. Method 2. You may need a software program such as Adobe Reader to view the file.

Follow national and local guidelines for installing your dish. There may be requirements or codes that restrict the size of your satellite dish or how high you can mount it. Find an appropriate location for your satellite receiver. Look for a clear, southern-facing area with a high vantage spot. Find coordinates for pointing your dish to get reception.

Connect your satellite receiver to the TV as specified in the receiver's manual. Connect both the television and satellite receiver to a power outlet. Turn them both on.

If there is no switch, turn to UHF channel 14 or channel number 65 on cable. Navigate the menu using buttons on the receiver's front panel and the receiver's manual to find the correct azimuth horizontal and elevation vertical coordinates. Determine and survey the dish's exact mounting site. Using the receiver's pointing coordinates, find the mounting site for your dish. Measure the number of feet meters of cable needed to finish the installation. Start assembling the satellite receiver dish.

Bolt or screw in the satellite's plastic or metal reflector to its support arm. This lets you preset the satellite to its correct elevation. Mount the mast, or pole, for the receiver.

Multiple options exist for this step depending on where you install the dish roof, hollow wall, on brick or concrete, etc. Consult the self-installation guide to see instructions and the necessary tools for each option.

Make sure the mast is level to get a satellite signal. Use a bubble level to help you determine it is even. Put the satellite receiver dish on its mast. Attach the LNB to the receiver's support arm. Position a grounding block as closely as you can to the place where the dish's cable will run into the house.

Run the receiver dish's cable to the grounding block. The connection to the block binds the dish to an acceptable grounded point in the main building ground, such as an enclosure for electrical service equipment or a metallic service raceway. Run the RG-6 coaxial cable to the back of the receiver inside the house.

The RG-6 cable should also be connected to the grounding block. Make sure a landline phone is off its hook to avoid getting an electric shock from any incoming calls.

Connect the receiver to a phone jack with the phone line. Check for a signal using the "Dish Pointing" menu's signal meter displayed on your TV screen. Adjust the dish's pointing to achieve your maximum signal strength. It depends on the connector on your surround sound system and your receiver sound. You will need to buy a wire that has a port compatible with your receiver in one end and with your sound system on the other end.

Yes No. Not Helpful 1 Helpful 2. It depends on what you call a pole. The dish needs to be mounted to a non-moving object.